Click for larger view

The PO upgraded the stove to a Force propane unit, which is nice. It came with a 10ft gas hose, regulator, gauge and connectors, which is also nice. What I didnt like was that the hose was just coiled up inside the cabinet under the stove, with one pound propane canisters connected. Looked like a project unfinished and a safety hazard. The propane tanks should be outside.

Click for larger view

I had to run the hose on top of the aft berth floor, it would be too difficult, if not impossible to run it under the floor. It was a challenge just to get wiring under there.

Click for larger view

The aft berth cushion covers it nicely though.

Click for larger view

The propane gas hose is run into the outside gasoline compartment. I used a Vapor-Tight Straight-Thru fitting.

Click for larger view

There is a quick disconnect fitting allowing the disconnection from the hose for stowage if desired. I added a gas shutoff valve for addition safety. If there is a leak, the gas will spill out the stern motor well. Theres enough room to store a couple extra canisters too.